Fehler beim erzeugen der DVD-Daten

tom1234 · Beitrag von **tom1234** » 03.09.2008, 09:23

Habe einen Clarke-Tech 5000 HD C!

Ich kann leider keine DVD's erstellen!
-------------------------------------------------------------------------------------
Das Verarbeitungsfenster sagt:

Demultiplexen:
Titel1
Benutzer hat Sitenverhältnis auf 16:9 festgelegt
AC3-Tonformat wird festgelegt auf: 5.1
DVD-Dateien werden erzeugt:
Fehler beim erzeugen der DVD-Daten!
Speicherbedarf:
Geschätzte Grösse: 2372 MB
Tatsächliche Grösse: 1 MB
Fehler beim erzeugen der DVD-Daten!
Fehler im letzten Verarbeitungsschritt!
-----------------------------------------------------------------------------------

Dann habe ich noch 2 Log-Dateien:

Log_Datei 1(DVD080902-201541)

*** DVD Verification Log ***
9 - 2 - 2008 -- 20:15:42

************************
* *
* VMG Verification *
* *
************************

Number of VTS - 1
Number of Menus: 2

Menu 01 - Type - Dummy

Menu 02 - Type - Dummy

Number of imported VTS: 0

************************
* *
* VTS Verification *
* *
************************

<<< VTS Number 1 >>>
Number of Titles: 1

Title 01 - Type - ES or PES
Video type does not match
Segment 1, Video File C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\Title-0.m2v
Frame Size: 0 X 0
Frame Rate 0 [1--23.976, 2--24, 4--29.97, 3--25, 5--30]
Wrong video frame rate
Aspect Ratio: 0 [43--4:3, 169--16:9]
Video aspect ratio is neither 4:3 nor 16:9
MPEG Video Type: 1 [1--MPEG 1, 2--MPEG 2]
Chroma: 1 [1--4:2:0, 2--4:2:2, 3--4:4:4]
Segment 1, Audio File C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\Title-0(0x0303).AC3
Audio type: AC3_Mot, Channel: 6, Sampling: 48000, Bitrate: 384000
Segment 1, Subtitle File : None

Number of Menus: 0

************************
* *
* Status Messages *
* *
************************
Pre verification fails. Process abort ! - 1998

------------------------------------------------------------------------------------

Log-Datei 2 (Debug080902-200817)

DVR-Studio Pro 2.10
running on: Windows NT/2000/XP
Output Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\
Authoring Demux Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP
Authoring VIDEO_TS Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\VIDEO_TS
Log-Level is set to: 2
\ CDVRStudioApp::InitInstance

Licence Data:
Serial number: 1486362129
Client number: 10752
Licence key: U9CZZ-TSWEX-JLAJ8-NF3PX-MRUH4
\ CReceiverMgr::LogSelected
35: Unbekannt / unknown
1: ~ Keiner / None ~
1: ~ Keiner / None ~
/
Error: 0x00000003
Das System kann den angegebenen Pfad nicht finden.

/
\ CDVRStudioDoc::OnOpenDocument
Opening File: C:\Dokumente und Einstellungen\TOM\Desktop\film\Option 1 @104b18c8.trp
\ CDVRStudioDoc::PreAnalyze
\ CDVRStudioDoc::DetectByteOrder
/
Patching AC3 Format to DD 5.1
/
/
\ CDVRStudioView::SwitchFilter
/
Error: 0x00000003
Das System kann den angegebenen Pfad nicht finden.

\ CDVRStudioView::OnBnClickedBatchMerge
/
\ CDVRStudioDoc::OnOpenDocument
Opening File: C:\Dokumente und Einstellungen\TOM\Desktop\film\Option 1 @104b18c8.001
\ CDVRStudioDoc::PreAnalyze
\ CDVRStudioDoc::DetectByteOrder
/
/
/
\ CDVRStudioView::SwitchFilter
/
Error: 0x00000003
Das System kann den angegebenen Pfad nicht finden.

\ CDVRStudioView::OnLbnDblclkBatchlist
\ CDVRStudioDoc::OnOpenDocument
Opening File: C:\Dokumente und Einstellungen\TOM\Desktop\film\Option 1 @104b18c8.trp
\ CDVRStudioDoc::PreAnalyze
\ CDVRStudioDoc::DetectByteOrder
/
Patching AC3 Format to DD 5.1
/
/
\ CDVRStudioView::SwitchFilter
/
Error: 0x00000003
Das System kann den angegebenen Pfad nicht finden.

/
\ CDVRStudioView::OnBnClickedBatchMerge
OnBnClickedBatchMerge: only one track selected, ask user to merge all.
user: merge all tracks now.
Iterate to merge tracks now
track: Option 1 @104b18c8.trp
track: Option 1 @104b18c8.001
\ CDVRStudioView::CloseDocument
/
Add segments to main file now
Refresh batch list
\ CDVRStudioDoc::OnOpenDocument
Opening File: C:\Dokumente und Einstellungen\TOM\Desktop\film\Option 1 @104b18c8.trp
\ CRawFile::AddSegment
/
\ CDVRStudioDoc::PreAnalyze
\ CDVRStudioDoc::DetectByteOrder
/
Patching AC3 Format to DD 5.1
/
/
\ CDVRStudioView::SwitchFilter
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment Error: 0x00000003

\ CRawFile::AddSegment
/ /
/
Das System kann den angegebenen Pfad nicht finden.

/
/
\ CDVRStudioView::OnSelStart
\ CDVRStudioView::SwitchFilter
/
\ CDVRStudioView::OnSelNew
\ CDVRStudioView::SwitchFilter
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment\ CRawFile::AddSegment

/
/
/
/

\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/

/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/
/
/

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment

/ /

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment
\ CRawFile::AddSegment

/
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/

/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/

/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment

/ /

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment

/
/
/
\ CDVRStudioView::OnSelEnd
\ CDVRStudioView::SwitchFilter
/
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment
\ CRawFile::AddSegment

/ /

/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/ / /

\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/
/
/

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/

/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment
/
/
/

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
\ CRawFile::AddSegment
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/
/
/

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment\ CRawFile::AddSegment

/
/
/
/
\ CRawFile::AddSegment\ CRawFile::AddSegment

\ CRawFile::AddSegment\ CRawFile::AddSegment/

/

/
/
\ CRawFile::AddSegment\ CRawFile::AddSegment

\ CRawFile::AddSegment/

/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment

/ /

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CDVRStudioView::OnSelStart
\ CDVRStudioView::SwitchFilter
/
\ CDVRStudioView::OnSelNew
\ CDVRStudioView::SwitchFilter
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
/ \ CDVRStudioView::OnSelStart
\ CRawFile::AddSegment

/
\ CRawFile::AddSegment
\ CDVRStudioView::SwitchFilter
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
/
/
\ CRawFile::AddSegment
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment\ CRawFile::AddSegment

/

/ /

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
\ CRawFile::AddSegment
/ /

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/

/ /

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/ /

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/ /
/

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
/ /

\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment
\ CRawFile::AddSegment

/
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/

/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/
/

/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/

/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment\ CRawFile::AddSegment

/
/
/

/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment/

/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment\ CRawFile::AddSegment

/
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment

\ CRawFile::AddSegment
/
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment
/

/ / /

\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment
\ CRawFile::AddSegment

/ /
/
/

\ CRawFile::AddSegment
\ CRawFile::AddSegment\ CRawFile::AddSegment

\ CRawFile::AddSegment/
/
/

/ \ CRawFile::AddSegment\ CRawFile::AddSegment

/
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
/
\ CRawFile::AddSegment
/
\ CDVRStudioView::OnSelEnd
\ CDVRStudioView::SwitchFilter
/
\ CRawFile::AddSegment
/
/
\ CRawFile::AddSegment
\ CRawFile::AddSegment
/
/
\ CDVRStudioView::OnBnClickedBtOptionsVideo
\ CDVRStudioView::HandleTrackPopupMenu
Change aspect to 16:9
/
/
writelib.dll loaded successfully.
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CDVRStudioApp::CreateSubDirs
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CWizDVD::AddPages
/

\ CPlusFunctionMgr::FnDemultiplex
File: C:\Dokumente und Einstellungen\TOM\Desktop\film\Option 1 @104b18c8.trp
\ CDVRStudioApp::CreateSubDirs
/
\ CMpegTsDemux::Init
/
Title-0
Demultiplexing recording to separate MPEG ES:
First Video PTS is 0:00:02,335
First Audio PTS is 0:00:02,400
Patching Aspect Ratio to 16:9
Compensated AC3 Audio Delay: 64ms
Reached end of stream.

Synch Summary:
Skipped or missing Video Frames: 0ms
Skipped or missing Audio Frames: 0ms
Runtime Summary:
Total video runtime: 1h47:46,320
Total audio runtime: 1h47:46,496
Consolidating errors
Done, 201s

/

\ CPlusFunctionMgr::FnAuthor
\ CPlusFunctionMgr::Author
\ CDVRStudioApp::CreateSubDirs
/
/
\ CDVRStudioApp::CreateSubDirs
/
/
writelib.dll loaded successfully.
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/
\ CBurnGeneric::UpdateMediaInfo
Media Code: 0
Capacity = 0
Media Type:
Speeds: 0
/

-------------------------------------------------------------------------------------

Der Film wird komplett eingelesen und ich kann ihn auch schneiden!

Ordner sind alle eingestellt und die erstellten Dateien sind auch im Ordner!

Was mache ich Falsch?

Habe einen Topfield-Film mit dem Prog bearbeitet und kein Problem gehabt!

MfG
TOM

Beitrag von **Kimi** » 04.09.2008, 15:40

Der Video_TS Ordner ist im Ordner für die Demux UND Output Dateien mit enthalten:
Output Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\
Authoring Demux Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP
Authoring VIDEO_TS Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\VIDEO_TS

Ändere das bitte ab auf:
Output Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\Output
Authoring Demux Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\Demux
Authoring VIDEO_TS Path: C:\Dokumente und Einstellungen\TOM\Desktop\DVR RIPP\VIDEO_TS

Oder setze die Einstellungen auf Standard zurück (Fenster Einstellungen unter "Diverses" und lass erst einmal alles unverändert.

tom1234 · Beitrag von **tom1234** » 04.09.2008, 19:10

Hallo Kimi,

habe die Ordnereinstellungen wieder auf Standard zurück gesetzt!

Siehe da es Funzt jetzt!

Was mich aber doch ein bißchen wundert ist das ich Topfield Dateien vom einen 5000 MP mit der Ordneroption bearbeiten kann?

Grüße aus Braunschweig

Tom

Ananda · Beitrag von **Ananda** » 05.09.2008, 11:45

Gute Frage ???

Auf jeden Fall ein Check bei Eingabe / Modification der Pfad settings wäre vielleicht hilfreich sowas zu verhindern ...

tom1234 · Beitrag von **tom1234** » 06.09.2008, 08:14

Hallo aus Braunschweig,

bin jetzt wieder auf die 2.02 zurück gegangen!

Das 1 MB Prob ist wieder aufgetreten!

Werde es mal länger testen!

MfG

Tom