Transfermodul

[Bluesky320]

Transfermodul Humax 8000PVR 1.30

Hello,

I have transferred the .vid files from my Humax PVR-8000 to my computer HDD via USB and downloaded the Transfermodul Humax 8000PVR 1.30, but nothing happens: I can not read the files

I have Windows XP SP3. What should I do?

Thanks in advance for your help.

[Ralf]

Hello Bluesky3,

you have store your records on the local hard drive?
Normally you can open these files with DVR-Studio Pro (only SD) or DVR-Studio HD (SD + HD)

If these records from a pay TV station, please check you play it without the pay-TV-card. If you can't play it in the receiver, these records are crypted. In this case we can't use it.

[Bluesky320]

Hello Ralf,

Thanks very much for your quick answer.

I have transferred the vid files from the receiver Humax PVR-8000 on an external HD.
The files are not from a pay-TV station, and I can play them in my receiver without any problem.

But I can not play them on my computer (vid files unknown from Windows or any other player that I know).

[Ralf]

Hello Bluesky320,

that's correct. These file is a transport stream. But you can play it in DVR-Studio HD 1.x or 2.x.
Have a look at these video:
http://prod.haenlein-software.com/HS/su ... ssing.html

[Bluesky320]

Hello Ralf,

It works with DVR-Studio Pro! Waow! That is just great! A great software!

If I just want to decode and view the videos on my computer (I do not want to burn any DVD) or if I just want to add 2 files together, do I really need DVR-Studio Pro? Is DVR-Studio enough?

Kindest regards.

[Ralf]

Hello Bluesky320,

in this case the best solution is DVR-Studio HD 1.x, because so you have an player and the program is for the future: He can SD AND HD.

DVR-Studio has no player and only can SD.

I just want to add 2 files together

See here:
http://prod.haenlein-software.com/HS/su ... assen.html

On our support site under DVR-Products you will find futher videos.
Here are a compare list of our products:
http://www.haenlein-software.com/HS/dir ... =24&lang=2

[Bluesky320]

Hello Rolf,

Thanks very much for your reply.

What is the best output format: ts or m2ts?

Kindest regards.

[Bluesky320]

Hello Rolf,

I tried the DVR-Studio HD 1.x.

First try to save in m2st format worked well. Secund try stops and frizzes at 8,3%.

First and subsequent tries to save in ts format stops and frizzes at 7,9%.

What should I do please?

Thanks in advance.
Kindest regards.

[Sascha]

Hi,

there is no difference in quality between ts or m2ts.
Just take the one which is easier to playback for you.
M2TS might be more supported. Free players for PC are mPlayer or VLC.

Concerning the frizzes:
Did you have a try running the error analysis? (the red icon with the flashlight on right top)
This will analys the recording to errors referred to signal loss (e.g. bad weather).
If the analysis detects some errors please transform the error definitions into cut definitions. You can do this by selecting those and press a button below the definition list.
Then process your project again.
If it frizzes again please send us a support request (under Help & Manual). The software will attach the logfiles automatically. Just add a clear error description and we will have a look what went wrong.

Best regards
Sascha

[Bluesky320]

Hi Sascha,

I tried again to save the Humax files into 1) m2ts and then into 2) ts.

Eventhough they both freezed again, I nevertheless let the software finish the work.

At the end, I got the message: "Processing possibly incompletely. Please check the output file." I did that and the end is missing, in both m2ts and ts. Original file: 1,28Go, m2ts: 94'088 Ko, ts: 90'416 Ko.

Then, I run the errors analysis as you suggested, and I got the same message.

I did not understand the next step, so I did not do it, sorry: "please transform the error definitions into cut definitions. You can do this by selecting those and press a button below the definition list."

I am going to send you a support request.

Thanks again for your help.

[Bluesky320]

I am trying to send you the report, but every time that I click on "Finish the support request" (after having downloaded and run the tester), I have first the following message:

"The process cannot access the file because it is being used by another process", I click "OK" and then "Then files are uploaded to Haenlein-Software, please wait" but nothing moves, nothing is downloaded, I have the same screens for more than 1 hour.

What should I do?
Thanks in advance.

Kindest regards.

[Sascha]

Hm… this is sadly referred to the same situation.
Well in that case just restart your PC, start the software and make the support request immediately.
I would guess that the crashing process still touches a file which should be used during the support request process. But only one is allowed.
By restarting the PC this crashed process is surely gone.

Best regards
Sascha